<div class="csl-bib-body">
<div class="csl-entry">Tumpold, D. (2014). <i>Modeling and optimization methods of an electrostatically actuated MEMS speaker</i> [Dissertation, Technische Universität Wien]. reposiTUm. https://doi.org/10.34726/hss.2014.23532</div>
</div>
-
dc.identifier.uri
https://doi.org/10.34726/hss.2014.23532
-
dc.identifier.uri
http://hdl.handle.net/20.500.12708/5628
-
dc.description
Zsfassung in dt. Sprache
-
dc.description.abstract
Der Markt an Batterie betriebenen Geräten wie Smartphones oder Tabletts nimmt stark zu. Der Trend geht immer mehr in Richtung schlanker und dünner Gehäuse. Um die Laufzeit dieser Geräte bei gleichbleibender, oder sogar schlankerer, Gehäuseform zu verlängern, ist es wichtig energieeffiziente Bauteile zu verbauen. Silizium gefertigte mikro-elektro-mechanische Systeme (MEMS) verbinden kostengünstige und platzsparende Eigenschaften als energieeffizientes und innovatives Produkt. In dieser Arbeit werden reversibel betriebene Silizium- Mikrophone modelliert und hinsichtlich Schalldruckpegel und Signalqualität optimiert. Die Modelle werden mit Hilfe von gekoppelten partiellen Differentialgleichungen beschrieben und mit der Methode der Finiten Elemente gelöst. Auf Grund der geringen Dimensionen eines Einzelwandlers von zirka einem Millimeter Durchmesser und zwei Mikrometer dicke, werden die Lautsprecher in einem acht Bit Array betrieben. Der Array-Betrieb ermöglicht zusätzlich neben analogen Betriebsmoden, auch Untersuchungen der digitalen Schall-Rekonstruktion. Geometrische Nichtlinearitäten, wie große Verformung, Vorspannungen oder mechanischer Kontakt werden im mechanischen Model abgebildet und elektrostatisch angeregt. Mit Hilfe der virtuellen Verschiebung wird der Einfluss von Isolationsschichten auf den elektrostatischen Kraftbeitrag abgebildet. Die elektrostatisch angeregte Membran resultiert in einer mechanischen Bewegung und koppelt in ein akustisches Model. Die Herausforderung im akustischen Ausbreitungsgebiet liegt einerseits in der Anzahl der Unbekannten, welche durch Anwendung von Mortar FEM (nichtkonforme Gitter) minimiert werden können, und andererseits in den Reflexionen an den Randbereichen der Ausbreitungsregion. Diese Reflexionen werden mit absorbierenden Randbedingungen oder einem zusätzlichem Gebiet mit dämpfenden Eigenschaften minimiert. Für akustische Berechnungen am Einzelwandler, werden die Finite Elemente Methode angewendet, wobei für akustische Berechnungen des gesamten acht Bit Arrays wird ein eigens entwickeltes Wellen-Feld-Berechnungs-Tool, basierend auf dem Kirchhoff-Helmholtz Integral angewendet. Zusätzlich werden zwei Optimierungsstrategien vorgestellt. Die Erste beschäftigt sich mit Stress induzierten Buckeln der Gegenelektrode, was eine flache kostengünstige Fertigung ermöglicht und gleichzeitig den Schalldruck optimiert. Die Zweite beschäftigt sich mit der digitalen Schallerzeugung.
de
dc.description.abstract
The market for battery powered devices, such as smart-phones or tablets increases rapidly. The trend goes towards smaller and thinner cases. The main challenge is to decrease the power consumption by coincidently shrinking the device size and increasing the efficiency. Micro-electro-mechanical-systems (MEMS) manufactured of silicon, merge cost effective and space saving features as an energy efficient and innovative product. In this work, reversible operated silicon microphones are modeled and optimized towards sound pressure level and total harmonic distortion. The models are described by coupled partial differential equations and solved by the help of the finite element method. Due to the small dimensions of a single acoustic transducer of approximately one millimeter in diameter and two micrometer in thickness, the loudspeaker is manufactured as an eight bit array. The array arrangement opens up the opportunity to drive the speaker in conventional analog driving mode or apply digital sound reconstruction. Geometric nonlinearities such as large deformation, pre-stress or mechanical contact are reflected in the mechanical model and excited electrostatically. By applying the virtual displacement method, the influence of the insulation layer is mapped to the electrostatic force computation. The electrostatic force interacts with the structural mechanics and the membrane starts to oscillate. The electrostatically actuated membrane is coupled to the acoustic model, where the sound pressure level is computed. The challenge in the acoustic propagation computation is on the one hand, the number of unknowns, which can be minimized by using Mortar FEM (non-conforming grids), and on the other hand, in the reflections caused by the bounds of truncating the propagation region. These reflections are minimized with absorbing boundary conditions or a perfectly matched layer surrounding the propagation region. Acoustic results on the single transducer were computed by the finite element method, where for the full speaker array a specially developed wave field computation software was used based on the Kirchhoff-Helmholtz integral. In addition, two optimization strategies towards increasing the sound pressure level were presented. The first deals with stress-induced self raising of the back plate structure, to increase the volume flow and sound pressure level. The second deals with the digital sound reconstruction, investigating the non-reset, with-reset and latched method.
en
dc.language
English
-
dc.language.iso
en
-
dc.rights.uri
http://rightsstatements.org/vocab/InC/1.0/
-
dc.subject
Lautsprecher
de
dc.subject
MEMS
de
dc.subject
Mikrofon
de
dc.subject
Siliciumbauelement
de
dc.subject
Elektrostatischer Lautsprecher
de
dc.subject
Akustische Signalverarbeitung
de
dc.subject
Schalldruckpegel
de
dc.subject
Schallerzeugung
de
dc.subject
Akustisches Wellenfeld
de
dc.subject
Finite-Elemente-Methode
de
dc.title
Modeling and optimization methods of an electrostatically actuated MEMS speaker
en
dc.type
Thesis
en
dc.type
Hochschulschrift
de
dc.rights.license
In Copyright
en
dc.rights.license
Urheberrechtsschutz
de
dc.identifier.doi
10.34726/hss.2014.23532
-
dc.contributor.affiliation
TU Wien, Österreich
-
dc.rights.holder
David Tumpold
-
tuw.version
vor
-
tuw.thesisinformation
Technische Universität Wien
-
tuw.publication.orgunit
E325 - Institut für Mechanik und Mechatronik
-
dc.type.qualificationlevel
Doctoral
-
dc.identifier.libraryid
AC11424165
-
dc.description.numberOfPages
201
-
dc.identifier.urn
urn:nbn:at:at-ubtuw:1-63868
-
dc.thesistype
Dissertation
de
dc.thesistype
Dissertation
en
dc.rights.identifier
In Copyright
en
dc.rights.identifier
Urheberrechtsschutz
de
tuw.advisor.staffStatus
staff
-
item.fulltext
with Fulltext
-
item.cerifentitytype
Publications
-
item.mimetype
application/pdf
-
item.openairecristype
http://purl.org/coar/resource_type/c_db06
-
item.languageiso639-1
en
-
item.openaccessfulltext
Open Access
-
item.openairetype
doctoral thesis
-
item.grantfulltext
open
-
crisitem.author.dept
E325 - Institut für Mechanik und Mechatronik
-
crisitem.author.parentorg
E300 - Fakultät für Maschinenwesen und Betriebswissenschaften